Australian material tools

Brick Calculator Australia

Estimate bricks for walls using metric wall dimensions, openings, brick face size, mortar joint thickness, wall leaves and waste allowance. Optional pallet and cost fields help turn the quantity into a purchase estimate.

Wall and brick details

Use the actual brick dimensions and mortar joint specified for your project. The defaults are editable planning inputs.

metres (m)

metres (m)

m² to subtract from each wall

quantity

use 2 only where two separate brick leaves are required

percent (%)

millimetres (mm)

millimetres (mm)

millimetres (mm)

use supplier pack quantity

AUD per 1,000 bricks

Brick estimate

Results update as you change the inputs.

Net brickwork area16.20 m²
Brick module area0.0206 m²
Approx. bricks per m²48.45
Bricks before waste785 bricks
Bricks including waste825 bricks
Estimated pallets—
Estimated brick cost—
One-leaf basis: the wall area is multiplied by the number of leaves selected. Openings are subtracted before the leaf multiplier is applied.

Worked example: bricks for an 8 m wall

For an 8 m long × 2.4 m high single-leaf wall with 3 m² of doors and windows, the net wall area is (8 × 2.4 − 3) = 16.20 m². With a 230 × 76 mm brick face and 10 mm mortar joints, the face module is 0.24 × 0.086 = 0.02064 m² per brick. Rounding up, the theoretical quantity is 785 bricks. With an illustrative 5% allowance applied before rounding, the calculator returns 825 bricks.

This is a face-area quantity method, not a bond-specific take-off. Double-leaf walls, corner bonding, piers, lintels, soldier courses and manufacturer tolerances may change the number of bricks required. Confirm your selected brick dimensions and wastage with the supplier. For related materials, use the Australian material calculators hub.

How the brick calculation works

Net wall area = (length × height − openings) × wall quantity × leaves
Brick module = (brick length + joint) × (brick height + joint)
Brick count = net wall area ÷ module area, rounded up

The mortar joint is included in the module size because laid bricks occupy more wall area than the brick face alone. SiteSum then applies the waste allowance and rounds the final quantity up to whole bricks.

About Australian brick sizes

Brick dimensions, mortar joints, bond patterns and supplier pack sizes vary. The 230 × 76 mm face and 10 mm joint shown by default are editable inputs rather than a claim that every Australian project uses the same brick module.

Brick calculator FAQs

Does this calculator include mortar quantity?

No. Mortar volume depends on brick geometry, joint thickness, wall thickness, bond and workmanship. This calculator focuses on brick quantity so those assumptions are not hidden.

How do I calculate double-brick walls?

Select two wall leaves if the project genuinely has two separate brick leaves over the same net wall area. Check your drawings because cavity construction and veneer systems are not all equivalent.

Should I always use 5% waste?

No. Waste depends on cuts, bond, breakage, detailing and how much matching stock you want to retain. Edit the allowance to suit the project and supplier advice.

Browse more SiteSum material calculators →

Planning estimate only: verify wall dimensions, openings, brick size, joint thickness, bond, wall construction, pack quantities and current supplier pricing before ordering.