SiteSum calculation standard

How SiteSum Calculators Work

SiteSum turns project dimensions and user-supplied rates into practical planning estimates. This page explains the formulas, assumptions, units, allowances and sourcing rules used across our Australian building and renovation calculators.

In short: quantity calculators are driven by transparent geometry and arithmetic. Cost calculators combine calculated quantities with editable rates, allowances and project inputs. Results are planning estimates, not engineering design, a site measure or a contractor quotation.

Transparent formulas

We aim to show the underlying calculation or describe it clearly enough for users to check the result.

Editable assumptions

Waste, contingency, density, coverage and cost rates are editable where they can vary materially between projects.

Australian context

Tools use metric units and are written for Australian project planning, while avoiding the claim that one rate fits every location or supplier.

1. Measurement and unit conventions

SiteSum primarily uses metric units commonly used in Australian construction. Lengths are generally entered in metres or millimetres, areas in square metres (m²), volumes in cubic metres (m³), and bulk material mass in tonnes where relevant.

Where a calculator accepts millimetres for thickness or depth, the value is converted to metres before volume is calculated. For example, a 100 mm slab thickness is treated as 0.10 m.

Volume (m³) = Length (m) × Width (m) × Thickness (m)

2. Quantity calculations

Material calculators start with the physical geometry of the project. We then apply any project-specific factors such as openings, slope, number of layers, product dimensions or waste.

Calculator type Typical calculation approach Examples of adjustable assumptions
Concrete Length × width × depth, or the relevant footing/post geometry Waste allowance, quantity of elements
Roofing Plan dimensions adjusted for roof slope or direct roof area input Pitch, waste, roof complexity
Paint Paintable surface area × coats ÷ product coverage Doors/windows, coats, coverage rate, allowance
Tiles / pavers Project area ÷ unit area, then rounded to whole pieces Tile/paver size, waste, packs
Brickwork Net wall area ÷ brick-and-joint module area Openings, wall leaves, joint/module dimensions, waste
Gravel Area × compacted/planned depth, converted to volume and optional mass Allowance and bulk density

Where the final purchase must be a whole item, such as a brick, paver, tile, board or bag, SiteSum rounds the procurement quantity up rather than returning an unusable fraction.

3. Waste and allowance factors

Real projects rarely use exactly the theoretical quantity. Cutting, breakage, spillage, irregular geometry and ordering constraints can increase the amount required. Where appropriate, SiteSum includes an editable waste or allowance percentage.

Quantity including allowance = Net quantity × (1 + Allowance % ÷ 100)

The default allowance shown by a calculator is a planning assumption only. Complex layouts, diagonal cuts, fragile products or difficult site conditions can justify a higher allowance. Straightforward repetitive work may need less.

4. Cost estimates and editable rates

Construction prices vary by state, city, access, labour market, supplier, specification, project scale and date. For that reason, SiteSum does not treat a single prefilled dollar figure as a universal Australian price.

Where a calculator includes cost, the rate is either entered by the user or clearly presented as an editable planning assumption. For better project decisions, replace example rates with a current supplier price, contractor rate or project-specific quotation whenever possible.

Estimated cost = Calculated quantity × User/project rate + Fixed project costs

Cost calculators may also include contingency:

Estimated total = Subtotal + (Subtotal × Contingency % ÷ 100)

Contingency is not the same thing as profit, escalation or a contractor margin. It is simply an optional planning buffer for uncertainty unless a specific calculator states otherwise.

5. Data sources and rate references

When SiteSum refers to an external benchmark, product specification, industry guide or published cost range, we aim to identify the source close to the relevant calculator or explanatory text. Reference data can become outdated, so users should check current local information before making a purchase or signing a contract.

Our sourcing preference is to use first-party or authoritative information where practical, such as manufacturers, government sources, standards-related guidance and established industry publications. When no single authoritative market rate exists, the calculator is designed around editable inputs rather than presenting an unsupported national average as fact.

6. Rounding

SiteSum may display results with fewer decimal places than are used internally. This keeps the output practical while avoiding avoidable rounding error during intermediate steps.

  • Areas and volumes are generally shown to a sensible number of decimal places.
  • Individual products are rounded up to whole purchasable units.
  • Bulk ordering quantities may be rounded up to a practical increment where the calculator explicitly labels this as a planning order quantity.
  • Currency values are normally shown to the nearest dollar unless finer precision is useful.

7. Simplified geometry and project assumptions

Online calculators cannot see the actual site. A result is therefore only as accurate as the measurements and assumptions entered. Some tools intentionally use simplified geometry so they remain useful for early planning.

For example, a simple roof-area estimate from building footprint and pitch does not automatically account for every hip, valley, dormer, eave, penetration or architectural detail. A concrete slab volume does not automatically include thickened edges, beams or local thickenings unless the calculator provides inputs for them.

Each calculator should be read together with its assumptions and notes. If a project has unusual geometry, measure the individual components separately or use project drawings and professional take-off information.

8. What SiteSum results do not replace

SiteSum is a planning and estimation resource. Its outputs should not be relied on as structural design, certification, code compliance advice, surveying, quantity surveying, a construction contract, or a supplier/contractor quotation.

For decisions affecting safety, structural adequacy, waterproofing, fire performance, planning approval or regulatory compliance, use the relevant qualified professional and current project documents.

9. Calculator-specific methodology

Individual tools include their own assumptions because a universal rule cannot describe every material. You can see this in tools such as the Roof Pitch Calculator, Concrete Calculator, Paint Calculator and Renovation Cost Calculator.

As SiteSum grows, we will continue to make calculator assumptions visible and keep editable variables available where local products, rates or construction methods can materially change the result.

10. Technical review and practitioner input

SiteSum’s methodology and calculator framework are reviewed and vetted with input from professionals across structural engineering, research and Australian building practice. This review is intended to improve formula logic, assumptions, practical usability and technical clarity; it does not turn an online estimate into project-specific professional advice.

Kaleem Afzal Khan

Registered Structural Engineer and researcher. Kaleem contributes structural engineering, construction materials, numerical modelling and research input to SiteSum’s methodology and technical review.

LinkedIn · Google Scholar

Muhammad Ilyas

Registered Building Practitioner, Building Licensing WA — Licence No. BP107142. Muhammad Ilyas is the owner of Roma Renova and contributes practical Australian building and renovation perspective to the review process.

11. Corrections and updates

Construction products, pricing and guidance change over time. We review calculators as the site develops and may update formulas, defaults, explanatory notes or source references when better information becomes available. Our publication, source and correction principles are set out in the SiteSum Editorial & Technical Standards.

If you spot a calculation issue, outdated source or unclear assumption, please use the Contact page and include the calculator name, inputs used and the result you expected. Reproducible feedback is especially useful.

Use the calculators with the assumptions in view

Start with a project calculator, adjust the inputs to match your job, and treat the result as a planning estimate to refine with current project-specific information.

Explore all calculators

Methodology last reviewed: September 2026.