Australian material tools
Gravel Calculator Australia
Use this free gravel calculator to estimate cubic metres and tonnes for gravel, road base or decorative aggregate. Enter area and depth, then adjust bulk density, waste allowance and optional material cost for your Australian project.
Project dimensions
Use rectangular dimensions or enter the total area directly. Depth is entered in millimetres for practical site use.
Gravel estimate
Results update as you change the inputs.
How the gravel calculation works
Volume = area × depth in metres
Tonnes = volume including allowance × bulk density
The allowance is applied after the net geometric volume. It can help cover uneven subgrade, settlement, spreading losses and small measurement variations, but the appropriate percentage depends on the job.
What depth should I use?
Use the compacted design depth for the layer you are estimating. Decorative gravel, pathways, driveways and road-base layers can require very different depths, so the calculator deliberately does not impose a universal preset.
Gravel calculator FAQs
Can I use this for road base?
Yes. Enter the relevant area and compacted depth, then use the supplier’s bulk density for the actual road-base product.
Why is the density editable?
Different aggregates have different bulk densities, and moisture and grading can also change delivered weight. An editable value gives a more transparent estimate than assuming one universal conversion.
Should I order by cubic metre or tonne?
That depends on how your supplier sells the material. SiteSum shows both so you can compare with the supplier’s ordering unit.
Browse more SiteSum material calculators →