Australian extension budgeting tool

House Extension Cost Calculator Australia

Estimate an early-stage house extension budget from new floor area, an editable construction rate, existing-house interface allowance, professional and approval costs, other project costs and contingency.

Project inputs

Changing type updates the example rate only. You can overwrite the rate below.

Planning allowance for tie-ins, demolition, access, temporary works or site complexity. Replace with a project-specific allowance.
Example inputs only: the prefilled allowances are planning placeholders, not quotations. A 2026 hipages guide reports approximately $2,000–$4,000/m² for ground-floor extensions nationally and says second-storey extensions can cost about 50% more. Replace the rate and allowances with current project-specific information.

Estimated budget

New floor area40 m²
Base construction cost$120,000
Interface / site allowance$12,000
Design, engineering & approvals$15,000
Other project costs$0
Subtotal before contingency$147,000
Contingency amount$14,700
Estimated extension budget$161,700
Effective total cost per new m²$4,043/m²

How the house extension calculator works

Base construction cost = new floor area × construction rate.

Interface allowance = base construction cost × interface percentage.

Planning total = base construction + interface allowance + professional/approval costs + other costs + contingency.

The purpose is to stop a simple $/m² estimate from hiding the cost of connecting new work to an existing house. Tie-ins, demolition, structural modifications, access restrictions, services, temporary protection and approvals can materially change the budget.

What can change the cost of an extension?

  • Whether the extension is ground-floor or upper-level.
  • Structural changes required to the existing house.
  • Foundation and ground conditions.
  • Kitchen, bathroom and service-intensive rooms.
  • Roof complexity, glazing, finishes and energy-performance requirements.
  • Site access, demolition, temporary works and protection of occupied areas.
  • Design, engineering, energy assessment, approvals and certification.
  • Builder availability, location and project documentation quality.

Approvals and professional input

The Australian Government’s YourHome guidance says additions are substantial projects and will most likely require professional assistance such as a building designer or architect, structural engineer, energy assessor and licensed builder. It also notes that virtually all additions require approval before work proceeds. NCC guidance likewise explains that extensions and major renovations generally trigger current code requirements for the new or altered work.

Australian Government YourHome — Renovations and additions
NCC — How the NCC applies to your home
hipages — House extension cost guide (2026)

Frequently asked questions

Is a second-storey extension more expensive?

Often, yes. Current 2026 hipages guidance says second-storey extensions can cost about 50% more than comparable ground-floor extensions. The calculator uses that only as a starting example and keeps the rate editable.

Does the result include council and consultant fees?

Only to the extent you enter them in the Design, engineering & approvals field. Requirements differ by project and jurisdiction, so this field should be replaced with actual project allowances.

Is the cost per square metre enough to set a contract budget?

No. It is best used for early feasibility. Before committing to work, obtain drawings, engineering where required, approval advice and builder or quantity-surveyor pricing based on a defined scope.

Planning disclaimer: SiteSum provides preliminary estimating tools only. This calculator does not assess structural adequacy, planning controls, building approval, soil conditions, service capacity or construction feasibility.