The number of 20 kg premixed concrete bags needed for one cubic metre depends on the actual yield printed on the product. Bag mass alone does not tell you the finished concrete volume.
Written by: Kaleem Afzal Khan
Why there is no universal bag count
Two 20 kg products can use different aggregate grading, binder content and recommended water, producing different finished yields. That is why SiteSum asks for the manufacturer’s stated yield rather than hard-coding one answer for every brand.
If a 20 kg bag yields 10 litres, one cubic metre would require 100 bags before waste. If the stated yield were 9 litres, the same cubic metre would require about 112 bags before waste. The product label controls the calculation.
Worked example
Suppose a footing requires 0.25 m³ of concrete and your premix states a 10-litre yield per bag:
With a 5% handling allowance, the adjusted volume is 0.2625 m³, giving 27 bags after rounding up.
Use the Concrete Bag Calculator Australia to enter your actual yield, waste allowance and optional bag price.
Bagged mix or ready-mixed concrete?
Bagged premix can be practical for small repairs, posts and limited-volume work. As volume increases, handling, mixing time, consistency and labour become increasingly important. hipages’ 2026 guide places average pre-mixed delivered concrete around $400–$450 per m³ before project-specific delivery, access and placement factors.
For larger structural pours, the decision should consider concrete specification, delivery access, placement rate and quality control—not only the material arithmetic.
Do not forget volume accuracy
Before converting to bags, calculate the required concrete volume correctly. For a simple rectangular element:
Use metres for every dimension so the result is in cubic metres. For slabs, footings and other shapes, the SiteSum Concrete Calculator can do the volume step first.
Common mistakes
- Assuming all 20 kg bags have the same yield.
- Using millimetres directly in a cubic-metre formula.
- Buying exactly the theoretical number of bags with no allowance for losses.
- Using a bagged product without checking whether its strength and application suit the structural specification.
- Comparing bag cost with delivered concrete without accounting for labour and placement.
Source
Planning note: Always use the manufacturer’s yield and mixing instructions. Structural concrete should comply with the project specification and relevant professional requirements.