Decking Cost Australia: Timber vs Composite Budget Guide

Decking cost depends on more than the boards. Substructure, footings, height, access, stairs, balustrades, board layout and finishing can dominate the final budget.

Written by: Kaleem Afzal Khan

Practical review: Muhammad Ilyas

2026 context: hipages lists broad installed decking ranges starting around $200/m² for treated pine, around $320+/m² for hardwood and around $350+/m² for composite, with more complex elevated decks substantially higher.

The deck budget should have two layers

Deck total = area-based deck works + project-specific structure/access items + contingency

The area-based rate is useful for early planning. The second layer captures the things that are not proportional to deck area: stairs, balustrades, difficult footings, demolition, tight access, structural engineering and special detailing.

Timber vs composite cost

Item Timber Composite
Upfront material Can be lower for treated pine; hardwood varies widely Often higher than entry-level timber
Finishing May need oiling/staining depending on species and desired appearance Usually designed for lower routine finishing requirements
Board system Fixings and board dimensions vary by species/product Often uses proprietary clips, profiles and spacing requirements
Long-term budget Include maintenance in ownership cost Compare cleaning, warranty and replacement-board availability

Substructure can cost more than expected

Joists, bearers, posts, footings and connections are structural work. A low deck over good ground is different from an elevated deck with difficult access, sloping terrain or balustrades. The board choice does not remove those requirements.

Board quantity is a separate calculation

Use the SiteSum Decking Calculator for board modules and gaps. Then use the Deck Cost Calculator Australia to turn area and project-specific allowances into a budget.

Worked example

For a 24 m² deck at an editable installed rate of $320/m², area-based works are $7,680. Add $2,500 for stairs/balustrades and $1,200 for site/access, giving $11,380 before contingency. A 10% contingency produces an early total of $12,518.

Sources

Planning note: Confirm structural design, footing conditions, local approvals, material durability and contractor pricing for your site.