Australian material tools
Tile Calculator Australia
Estimate floor or wall tile quantities from room dimensions or a direct surface area. Add waste for cuts and breakage, calculate whole tiles, optional boxes and an indicative material cost.
Project dimensions
Choose a rectangular area or enter the total surface area directly. Use the actual tile face size and the box coverage stated by your supplier.
Tile estimate
Results update as you change the inputs.
Worked example: 600 × 600 mm floor tiles
A room measuring 5 m × 4 m has 20.00 m² of floor area. A nominal 600 × 600 mm tile covers 0.6 × 0.6 = 0.360 m². The area-only estimate is 56 tiles, rounded up. With a 10% cutting and breakage allowance, order area is 22.00 m², equivalent to 62 tiles before considering supplier box quantities.
For example, if each box is labelled as covering 1.44 m², the calculator rounds 22.00 ÷ 1.44 up to 16 boxes. Check whether the supplier’s stated coverage includes grout joints and verify the tile pattern, actual surface dimensions, skirting, niches and spare-tile requirements. For outdoor units, use the paver calculator instead.
How the tile calculation works
Single tile area = tile length × tile width after converting mm to metres
Tile quantity = required area ÷ single tile area, rounded up
The selected waste allowance is applied to the project area before SiteSum calculates the final whole-tile quantity. This allows for cuts, breakage and layout losses without assuming one percentage suits every project.
How much tile waste should I allow?
Waste depends on room shape, tile size, pattern, cuts, defects and whether matching replacement tiles may be needed later. A simple straight layout in a regular room can need less allowance than diagonal patterns or irregular spaces, so adjust the percentage for your actual job.
Tile calculator FAQs
Can I use this for wall tiles?
Yes. Enter the wall surface area directly, or calculate rectangular sections separately and combine them. Subtract doors, windows or other untiled areas before entering the final area.
Does grout width change the calculation?
This calculator uses tile face dimensions and a waste allowance for planning. For purchasing, use the box coverage printed by the manufacturer or retailer because that is the most direct figure for how much area a box is intended to cover.
Why are tile and box quantities rounded up?
You cannot normally buy part of a tile or part of a sealed box, so SiteSum rounds quantities up to whole units for planning.
Browse more SiteSum material calculators →