Australian material tools
Brick Calculator Australia
Estimate bricks for walls using metric wall dimensions, openings, brick face size, mortar joint thickness, wall leaves and waste allowance. Optional pallet and cost fields help turn the quantity into a purchase estimate.
Wall and brick details
Use the actual brick dimensions and mortar joint specified for your project. The defaults are editable planning inputs.
Brick estimate
Results update as you change the inputs.
Worked example: bricks for an 8 m wall
For an 8 m long × 2.4 m high single-leaf wall with 3 m² of doors and windows, the net wall area is (8 × 2.4 − 3) = 16.20 m². With a 230 × 76 mm brick face and 10 mm mortar joints, the face module is 0.24 × 0.086 = 0.02064 m² per brick. Rounding up, the theoretical quantity is 785 bricks. With an illustrative 5% allowance applied before rounding, the calculator returns 825 bricks.
This is a face-area quantity method, not a bond-specific take-off. Double-leaf walls, corner bonding, piers, lintels, soldier courses and manufacturer tolerances may change the number of bricks required. Confirm your selected brick dimensions and wastage with the supplier. For related materials, use the Australian material calculators hub.
How the brick calculation works
Brick module = (brick length + joint) × (brick height + joint)
Brick count = net wall area ÷ module area, rounded up
The mortar joint is included in the module size because laid bricks occupy more wall area than the brick face alone. SiteSum then applies the waste allowance and rounds the final quantity up to whole bricks.
About Australian brick sizes
Brick dimensions, mortar joints, bond patterns and supplier pack sizes vary. The 230 × 76 mm face and 10 mm joint shown by default are editable inputs rather than a claim that every Australian project uses the same brick module.
Brick calculator FAQs
Does this calculator include mortar quantity?
No. Mortar volume depends on brick geometry, joint thickness, wall thickness, bond and workmanship. This calculator focuses on brick quantity so those assumptions are not hidden.
How do I calculate double-brick walls?
Select two wall leaves if the project genuinely has two separate brick leaves over the same net wall area. Check your drawings because cavity construction and veneer systems are not all equivalent.
Should I always use 5% waste?
No. Waste depends on cuts, bond, breakage, detailing and how much matching stock you want to retain. Edit the allowance to suit the project and supplier advice.
Browse more SiteSum material calculators →