SiteSum resources

Australian Building & Renovation Resources

Practical articles to help homeowners, renovators and construction professionals understand quantities, costs, assumptions and common project decisions behind SiteSum calculators.

Cost planning

Guides on budgeting, cost-per-square-metre assumptions, contingencies and comparing project estimates.

Materials & quantities

Plain-English explanations of concrete, paint, tiles, bricks, decking, pavers, gravel and related take-offs.

Roofing & building basics

Helpful background on roof pitch, replacement planning and other common building measurements.

Latest articles

  • Paint Coverage per Litre Australia: How Much Paint Do You Need?

    Paint quantity depends on surface area, product coverage, number of coats, surface porosity and a sensible waste allowance. The product’s technical data should control the final calculation. Written by: Kaleem Afzal Khan Formula: litres required = paintable area × number of coats ÷ stated coverage (m²/L), then add allowance for losses and touch-up. Do not…

    Read article

  • Kitchen Renovation Budget Australia: How to Split the Money Before You Quote

    A kitchen budget is easier to control when it is split into decision buckets before design selections begin. That makes it obvious when cabinetry, appliances or layout changes are consuming contingency. Written by: Kaleem Afzal Khan Practical review: Muhammad Ilyas SiteSum budget buckets: joinery → benchtops/splashback → appliances → services → building/make-good → contingency. Why…

    Read article

  • Retaining Wall Cost per m² Australia: What the Rate Leaves Out

    A retaining-wall $/m² rate is useful for first-pass budgeting, but it can hide drainage, excavation, footings, access, engineering and ground risk. Use wall face area as the starting point—not the final estimate. Written by: Kaleem Afzal Khan Geotechnical review: Dr. Mehtab Alam 2026 guide context: current Australian cost guides put treated pine around $250–$350/m², hardwood…

    Read article

  • Bathroom Waterproofing Cost Australia: Scope, Risk and Budgeting

    Bathroom waterproofing cost should be treated as part of the wet-area system, not just the price of a membrane. Substrate preparation, junctions, penetrations, falls, shower detailing and repair of existing damage can all affect the scope. Written by: Kaleem Afzal Khan Practical review: Muhammad Ilyas Key budgeting rule: separate surface preparation → waterproofing system →…

    Read article

  • Concrete Cost per m³ Australia: How to Build a Realistic Pour Budget

    Concrete price per cubic metre is only one line in a pour budget. Delivery conditions, minimum loads, pumping, reinforcement, formwork, labour, finishing and waste can matter as much as the concrete itself. Written by: Kaleem Afzal Khan 2026 context: hipages currently lists average pre-mixed concrete around $400–$450 per m³ in Australia. Treat that as a…

    Read article

  • Tile Roof Replacement Cost Australia: Concrete, Terracotta and Hidden Scope

    Tile roof replacement cost depends on tile type, roof pitch and complexity, removal, battens, underlay or sarking, ridge and valley details, access and the condition of the existing roof structure. Written by: Kaleem Afzal Khan Technical review: Muhammad Ilyas 2026 context: hipages lists broad replacement material rates around $40–$60/m² for concrete/asphalt tiles and $80–$120/m² for…

    Read article

  • Concrete Sleeper vs Timber Retaining Wall Australia: Cost and Risk Comparison

    Concrete sleepers and treated timber can both be used in retaining-wall systems, but the best budget comparison includes posts, footings, drainage, excavation, access, durability and engineering—not just sleeper price. Written by: Kaleem Afzal Khan Geotechnical review: Dr. Mehtab Alam 2026 cost context: hipages currently gives treated pine retaining-wall installation around $250–$350/m², hardwood around $300–$450/m², while…

    Read article

  • Small Bathroom Renovation Cost Australia: Why Small Does Not Mean Cheap

    A small bathroom can have a lower total cost than a large bathroom, but its cost per square metre is often high because many trades and fixtures are fixed costs rather than area-based costs. Written by: Kaleem Afzal Khan Practical review: Muhammad Ilyas Small-bathroom rule: reduce scope before you reduce quality. Keeping plumbing locations, using…

    Read article

  • Decking Cost Australia: Timber vs Composite Budget Guide

    Decking cost depends on more than the boards. Substructure, footings, height, access, stairs, balustrades, board layout and finishing can dominate the final budget. Written by: Kaleem Afzal Khan Practical review: Muhammad Ilyas 2026 context: hipages lists broad installed decking ranges starting around $200/m² for treated pine, around $320+/m² for hardwood and around $350+/m² for composite,…

    Read article

Contributor research backgrounds: Explore Adil Poshad Khan (structural engineering), Muhammad Shahkar (geotechnical and seismic engineering), and Haidar Ali (structural dynamics). Visit the SiteSum Expert Team to learn how authorship and individual technical reviews are attributed. A contributor profile alone does not establish review of a particular resource.
How we write: articles will follow the same approach as our calculators—clear assumptions, Australian context, transparent sourcing where relevant, and a practical distinction between planning guidance and project-specific professional advice. See our Methodology and Editorial & Technical Standards.